Cost of Basic Service: Supports fixed costs such as metering, billing and customer service. This is a charge for having service available and is billed even if no water, electricity or wastewater services are used.

In some cases, a commercial building has multiple services, each of which has a basic charge. If you don't need separate meters for tenant billing, then combining electric services into one meter will reduce the basic charge. However, you usually must pay for an electrician to rewire the electric services.   

Delivery/Demand Charge: Covers the cost of bringing power to your home or business, including maintaining the poles, lines and substations. (Commercial Customers - see More About Demand Charge below.)

Energy Charge: Covers the cost of producing the electricity and sending it long distance to EWEB’s distribution system.

Wastewater Consumption-based Charge: Dec. - April based on actual water consumption. May - Nov. based on previous winter’s average water consumption.

Watershed Recovery Fee: Temporary flat fee to pay for wildfire restoration projects in the McKenzie watershed, assessed based on meter size. For most residential and business customers, the fee is a flat $3 per month (based on a 1-inch or smaller water meter). Some customers, such as large businesses and those with extensive irrigation needs, pay more ($4.50 to $30 per month) based on meter size. The fee went effect mid-2021 and will be in place for 60 months (5 years), at which time it will automatically sunset.

Additional Services: This section highlights other utility services and charges, such as loans, rebates, Customer Care donations, account processing charges, late fees and collection charges, plus other special programs.

Due Upon Receipt: If "Due Upon Receipt" appears in the Payment Due box, you have an existing past-due balance. In this case, your bill is due immediately. If your account is past due, we may disconnect your service and additional charges are required to reconnect your service. If you feel you are unable to pay your bill in full by the due date, give us a call.

Reactive (power factor) power charge: Simply, a facility that runs many motors will produce a large inductive energy load called reactive power. We measure this reactive power to properly allocate power costs to each facility.

A standard Watt-hour meter does not record reactive power. When motors or other inductive loads cause a shift between voltage and current, more current must be generated and supplied to accomplish the same electrical work.  

The reactive power meter measures the highest 15-minute period of reactive power in kVARs. When reactive power (kVAR) is significant in relation to true power (kW), energy providers call it low power factor. You can usually correct low power factor and reduce your reactive power charges by investing in power factor correction at your facility. 

View a sample bill with explanations of charges.

Why do storm and wastewater charges appear on my EWEB bill?

Charges related to stormwater and wastewater appear in the water portion of customer bills, but are not EWEB charges. The City of Eugene owns and operates the stormwater and wastewater systems in Eugene. For efficiency, EWEB acts as the City's billing agent per City charter.

The City of Eugene increased stormwater fees multiple times in 2025.  This means EWEB customers will see THREE City of Eugene fee increases on their bills in 2025. 

• February 1, 2025: 5% increase
• July 1, 2025: 5% increase
• August 1, 2025 thru July 2031: 18% increase

Stormwater fees help manage runoff, reduce flooding risk, and improve water quality. The funds support services like street sweeping, sediment removal from storm drains, maintaining rain gardens, and preserving parks and open spaces.

If you look at your EWEB bill, you will notice different types of charges that make up the total amount owed. These types of charges vary by customer class (residential, commercial, and industrial), but fixed charges (cost of basic service) and volumetric charges (kWh and KGAL) are always present. 

The Basic Charge is intended to cover fixed costs associated with water and electricity services. These costs are fixed because EWEB incurs the same cost to build the line, install the pipe, and maintain the systems that deliver water and electricity to all customers, regardless of how much energy or water you use in any given month.   

What’s included in the Basic Charge? 

• Infrastructure and equipment like meters, poles, transformers, pipes, and trucks needed to service our territory of about 240 square miles
• Buildings to house necessary fleet and equipment
• Labor to provide customers with safe and reliable service, including system maintenance, emergency response, engineering, and planning
• Business functions including billing, information technology, phone systems, costs related to accounting, financing, collections, dispatching, customer service, and communication
• Debt service on bonds issued to fund major capital projects
• Insurance and other overhead costs

While it is EWEB's intention to collect usage data from the meter each month, there are occassions when we need to estimate a customer's usage due to various circumstances such as weather, technical difficulties, complications accessing the meter, or due to changes in staffing.

If we are unable to collect the actual meter read, standard business practice is to calculate an estimate of the amount of energy and water you used in that billing period. 

When actual usage is collected after an estimate, any difference between the prior estimation and your actual usage is automatically corrected. If our estimate was too low (your usage was more than we estimated), the difference between the estimated usage and your actual usage will be added to your next bill. If our estimate was too high (your usage was less than we estimated), you'll be credited on your next bill for the additional amount you paid.

When you turn on a piece of equipment, you expect to have enough power available to operate it. Because electricity isn't stored, it must be generated as it's needed. We must have access to enough generating and distribution capacity to meet all customers' maximum power needs.

Business customers pay a separate demand charge to cover the cost of having this capacity on reserve. Residential customers pay for this capacity through a higher residential energy rate. It's a bit like owning a car. You make loan and insurance payments no matter how much you drive. Those are fixed costs. If you only drive down to the corner store once a week, the cost per mile for driving will be high.  

Examples 3 and 4 show two different cases with different demand charges. Operating all three motors at the same time in Example 4 creates 15 kW of demand, or three times the demand one motor creates in Example 3. This triples the demand charge. Notice that in both cases, the energy (kWh) use and the energy charge is the same. We use approximate and rounded energy and demand rates in these examples.  

If your operation allows, you can reduce demand charges by staggering motor or other equipment use so that less total equipment power is on at any given time. You can manage your demand with controls, changes in your operation or improvements to equipment efficiency.